Internal Clamp Case 4
This pneumatic manipulator is used by the customer to lift 130kg vertically standing reels and place them on a winch lifter by turning them 90°.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-250 |
| Main Body options |
|
| Pedestal model | Ceiling mount |
| Control method | Double control clamp |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 130kg |
|---|---|
| Max. working radius | R2402mm |
| Operating air pressure | 0.78MpaG |
| Air consumption | 302NL/min（Approx. 15s cycle time） |
| Net weight(W/P not included) | 460kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Hook Case 2
This is an all-standard pneumatic manipulator, designed to handle various internal components of industrial lifting equipment during periodic inspe...
Internal Clamp Case 4
This pneumatic manipulator is used by the customer to lift 130kg vertically standing reels and place them on a winch lifter by turning them 90°.
Vacuum Suction Case 15
This special industrial manipulator is designed with a futuristic design to add that modern look to your workspace. Functionality wise it is same a...
External Clamp Case6
Designed this one for palletizing compressed PET bottles on pallets at a waste disposal site. Large and cumbersome waste can be moved and handled e...
Vacuum Suction Case11
Developed for lifting 18 liter can and pour the contents into another container. Equipped with mechanisms to vacuum and tilt the can. This is a pri...
Hang Case2
Designed for handling plastic cases. Consists with two hook attachments and use them to hook the plastic case at both ends. By using this end effec...
BMS-250