Hang Case1
Designed for handling plastic cases. Consists with a hook attachment that hooks the plastic case at one end. By using this end effector you can stack heavy plastic cases effortlessly.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMG-38W |
| Main Body options |
|
| Pedestal model | SNG-38W (Floor mobile) |
| Control method | Regulator control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 20kg |
|---|---|
| Max. working radius | R2375mm |
| Operating air pressure | 0.49MPaG |
| Air consumption | 70NL/min（Approx. 10s cycle time） |
| Net weight(W/P not included) | 518.3kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Hang Case3
This one is used for installing seats in the cabin of a small excavator. End effector hooks the seat belt with a specially designed hook and place ...
Hook Case1
Using this manipulator, steel barrels can be effortlessly handled by hanging a commercially available barrel gripper on the hook.
Hang Case2
Designed for handling plastic cases. Consists with two hook attachments and use them to hook the plastic case at both ends. By using this end effec...
Hang Case1
Designed for handling plastic cases. Consists with a hook attachment that hooks the plastic case at one end. By using this end effector you can sta...
BMG-38W