Internal Clamp Case2
Designed for handling cable rolls. It is designed to handle inner diameter sizes that ranges from Φ250mm to 350mm.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-125 |
| Main Body options |
|
| Pedestal model | FSS-125（Floor mount） |
| Control method | Double control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 55kg |
|---|---|
| Max. working radius | R2190mm |
| Operating air pressure | 0.54 MPaG |
| Air consumption | 134NL/min（Approx. 15s cycle time） |
| Net weight(W/P not included) | 364kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Internal Clamp Case 4
This pneumatic manipulator is used by the customer to lift 130kg vertically standing reels and place them on a winch lifter by turning them 90°.
Vacuum Suction Case 15
This special industrial manipulator is designed with a futuristic design to add that modern look to your workspace. Functionality wise it is same a...
Vacuum Suction Case14
Designed and developed for transporting heavy and cumbersome ingots. As it was required to transport the ingot without scratching it, end effector ...
External Clamp Case9
Designed and developed for transporting heavy and cumbersome ingots. Since the end effector is equipped with mechanisms that clamp and rotate the w...
Internal Clamp Case2
Designed for handling cable rolls. It is designed to handle inner diameter sizes that ranges from Φ250mm to 350mm.
External Clamp Case2
Designed for handling long shafts by clamping at one end. Equipped with a mechanism that enables the adjustment of inclination that occurs due to t...
Vacuum Suction Case3
Designed and developed this end effector for stack cardboard boxes on pallets and conveyors by vacuuming the side surface of the cardboard box. It ...
Vacuum Suction Case2
Designed for move cardboard boxes from conveyor by vacuuming the side surface of the cardboard boxes and stack on pallets. By lengthening the handl...
BMS-125