Internal Clamp Case3
Designed and developed for handling reels. Handles by clamping the inner surface of the reel. After clamping, reels can be inverted too. By using this end effector you can save labor while improving the working environment.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMF-375W |
| Main Body options |
|
| Pedestal model | SNF-375W (Floor mobile) (Special) Fort inserting guides without casters |
| Control method | Regulator control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 230kg |
|---|---|
| Max. working radius | R2260mm |
| Operating air pressure | 0.49MPa |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Internal Clamp Case 4
This pneumatic manipulator is used by the customer to lift 130kg vertically standing reels and place them on a winch lifter by turning them 90°.
Vacuum Suction Case 15
This special industrial manipulator is designed with a futuristic design to add that modern look to your workspace. Functionality wise it is same a...
Hook Case1
Using this manipulator, steel barrels can be effortlessly handled by hanging a commercially available barrel gripper on the hook.
Vacuum Suction Case12
Designed and developed for handling fiber drums by vacuuming the top surface.
External Clamp Case3
Designed and developed for handling reels. Handles reels by clamping the outside surface. After clamping, reels can be inverted too. By using this ...
Internal Clamp Case3
Designed and developed for handling reels. Handles by clamping the inner surface of the reel. After clamping, reels can be inverted too. By using t...
Internal Clamp Case1
Designed and developed for handling reels. Handles reels by clamping the inner surface of the paper core. After clamping reels can be inverted too.
BMF-375W