Vacuum Suction Case10
Designed for placing large and cumbersome sheet metals on a laser cutting machine bed. In addition to the vacuum suction mechanism, this end effector is equipped with a workpiece inversing mechanism. Thanks to those mechanisms, you can save labor while improving the working environment.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMG-150W |
| Main Body options |
|
| Pedestal model | SNG-150W（Floor mobile） ・Vacuum pump mounted |
| Control method | Double control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 60kg |
|---|---|
| Max. working radius | R2220mm |
| Operating air pressure | 0.49MPaG |
| Air consumption | 196NL/min（Approx. 10s cycle time） |
| Power supply | AC200V 50/60Hz AC220V-60Hz |
| Rated current | 5.3/5.2A 5.2A |
| Net weight(W/P not included) | 1063kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
External Clamp Case7
Designed for transporting steel pipes by clamping outside. Fixed and mobile clamp claws were implemented, since there were more than one workpiece ...
Vacuum Suction Case10
Designed for placing large and cumbersome sheet metals on a laser cutting machine bed. In addition to the vacuum suction mechanism, this end effect...
Vacuum Suction Case9
Designed for placing large and cumbersome sheet metals on a laser cutting machine bed. In addition to the vacuum suction mechanism, this end effect...
Fork Case1
Designed and developed for handling cardboard boxes by scooping up by inserting the fork under the bottom surface and pulling out after moving to t...
BMG-150W