Vacuum Suction Case14
Designed and developed for transporting heavy and cumbersome ingots. As it was required to transport the ingot without scratching it, end effector was designed to handle workpieces by vacuum suction.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMC-150W |
| Main Body options |
|
| Pedestal model | CSC-150W (Ceiling mount) |
| Control method | Double control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 45kg |
|---|---|
| Max. working radius | R2240mm |
| Operating air pressure | 0.49MPaG |
| Air consumption | 196NL/min（Approx. 10s cycle time） |
| Power supply | Vacuum pump (High vacuum type) AC200V/Three-phase 1.5kW |
| Net weight(W/P not included) | 450kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Vacuum Suction Case14
Designed and developed for transporting heavy and cumbersome ingots. As it was required to transport the ingot without scratching it, end effector ...
External Clamp Case9
Designed and developed for transporting heavy and cumbersome ingots. Since the end effector is equipped with mechanisms that clamp and rotate the w...
BMC-150W