External Clamp Case1
This end effector is designed for handling of 1.75m～4m long cardboard boxes.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-150 |
| Main Body options |
|
| Pedestal model | SNS-150（Floor mobile）(Special) ・Fork insert guide, End effector stand |
| Control method | Double control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 53kg |
|---|---|
| Max. working radius | R2586mm |
| Operating air pressure | 0.54MPa |
| Air consumption | 183NL/min（Approx. 15s cycle time） |
| Net weight(W/P not included) | 1147kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Vacuum Suction Case 15
This special industrial manipulator is designed with a futuristic design to add that modern look to your workspace. Functionality wise it is same a...
Vacuum Suction Case3
Designed and developed this end effector for stack cardboard boxes on pallets and conveyors by vacuuming the side surface of the cardboard box. It ...
External Clamp Case1
This end effector is designed for handling of 1.75m～4m long cardboard boxes.
Vacuum Suction Case2
Designed for move cardboard boxes from conveyor by vacuuming the side surface of the cardboard boxes and stack on pallets. By lengthening the handl...
Vacuum Suction Case1
This one is designed and developed for handling cardboard boxes by vacuuming the top surface. Ideal for palletizing and depalletizing. Since the wo...
Fork Case1
Designed and developed for handling cardboard boxes by scooping up by inserting the fork under the bottom surface and pulling out after moving to t...
BMS-150