External Clamp Case4
Designed for moving 4 gallon bottles simultaneously to water dispensers. As in this case, having multiple goods handled at once will greatly improve the work efficiency.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-125 |
| Main Body options |
|
| Pedestal model | SNS-125(Floor mobile) (Special) ・Bracket mounted for Fork insert |
| Control method | Pneumatic auto sensing control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 48kg（12kg×4） |
|---|---|
| Max. working radius | R2390mm |
| Operating air pressure | 0.54MPaG |
| Air consumption | 134NL/min（Approx. 15s cycle time） |
| Net weight(W/P not included) | 821kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Hook Case1
Using this manipulator, steel barrels can be effortlessly handled by hanging a commercially available barrel gripper on the hook.
Vacuum Suction Case13
Designed this manipulator for handling plastic containers by vacuuming the side surface. Since 3 weights can be pre-set, 3 distinguish workpieces c...
External Clamp Case4
Designed for moving 4 gallon bottles simultaneously to water dispensers. As in this case, having multiple goods handled at once will greatly improv...
Vacuum Suction Case12
Designed and developed for handling fiber drums by vacuuming the top surface.
Vacuum Suction Case11
Developed for lifting 18 liter can and pour the contents into another container. Equipped with mechanisms to vacuum and tilt the can. This is a pri...
Hang Case2
Designed for handling plastic cases. Consists with two hook attachments and use them to hook the plastic case at both ends. By using this end effec...
Hang Case1
Designed for handling plastic cases. Consists with a hook attachment that hooks the plastic case at one end. By using this end effector you can sta...
BMS-125