External Clamp Case4
Designed for moving 4 gallon bottles simultaneously to water dispensers. As in this case, having multiple goods handled at once will greatly improve the work efficiency.
- Prev
- Next
Specification
| Type | Pneumatic BALAMAN |
|---|---|
| Model | BMS-125 |
| Main Body options |
|
| Pedestal model | SNS-125(Floor mobile) (Special) ・Bracket mounted for Fork insert |
| Control method | Pneumatic auto sensing control |
| Control options |
|
| End Effector |
|
Information
| Workpiece weight | 48kg（12kg×4） |
|---|---|
| Max. working radius | R2390mm |
| Operating air pressure | 0.54MPaG |
| Air consumption | 134NL/min（Approx. 15s cycle time） |
| Net weight(W/P not included) | 821kg |
1kg≒2.205lb, 1mm≒0.03937in
Related case studies
Internal Clamp Case 4
This pneumatic manipulator is used by the customer to lift 130kg vertically standing reels and place them on a winch lifter by turning them 90°.
External Clamp Case9
Designed and developed for transporting heavy and cumbersome ingots. Since the end effector is equipped with mechanisms that clamp and rotate the w...
External Clamp Case8
This manipulator is designed to clamp and move wrapped timber. Long and cumbersome timber can be handled with ease.
External Clamp Case7
Designed for transporting steel pipes by clamping outside. Fixed and mobile clamp claws were implemented, since there were more than one workpiece ...
External Clamp Case6
Designed this one for palletizing compressed PET bottles on pallets at a waste disposal site. Large and cumbersome waste can be moved and handled e...
External Clamp Case5
Designed and developed for handling automobile crankshafts. Since this end effector is equipped with mechanisms that clamp the outside of the crank...
External Clamp Case4
Designed for moving 4 gallon bottles simultaneously to water dispensers. As in this case, having multiple goods handled at once will greatly improv...
External Clamp Case3
Designed and developed for handling reels. Handles reels by clamping the outside surface. After clamping, reels can be inverted too. By using this ...
Internal Clamp Case3
Designed and developed for handling reels. Handles by clamping the inner surface of the reel. After clamping, reels can be inverted too. By using t...
Internal Clamp Case2
Designed for handling cable rolls. It is designed to handle inner diameter sizes that ranges from Φ250mm to 350mm.
External Clamp Case2
Designed for handling long shafts by clamping at one end. Equipped with a mechanism that enables the adjustment of inclination that occurs due to t...
Internal Clamp Case1
Designed and developed for handling reels. Handles reels by clamping the inner surface of the paper core. After clamping reels can be inverted too.
External Clamp Case1
This end effector is designed for handling of 1.75m～4m long cardboard boxes.
BMS-125